Page 768 - MISUMI SINGAPORE Economy Series

Economy series Product Overview
Urethane Pushers

vs Standard Type
Economy Series Saving
up to
Urethane Pushers 80 %

Firmly urethane molded

Not easy to break
9 Stable hardness
Locating Pins / Bushings / Clamping Screws / Positioning Stages

QCustomer confusion on usage and MISUMI Economy series improvement plan
Locating Pins Customer confusion on usage MISUMI Economy series

Easy to fall off for the adhesive layer Firmly urethane molded
P.745 Easy to fall off for the polyurethane Use high-quality materials and improve the
Bushings for Locating Pins adhesive layer coating process. The polyurethane adhesive
Resulting in failure of functions such as
layer is not easy to deform and the core
anti-collision and vibration damping
material is coated firmly and reliably.
P.749 Easy to break with impact Not easy to break
The adhesive layer is easy to be Reasonable product design and
Adjusting Bolts deformed and broken Ensure product durability
high-quality polyurethane raw materials
Bruise marks occur on the impact surface
(No damage to the impact surface after
(after 4800 impacts in 20 minutes)
P.753 4800 impacts in 20 minutes)
Measured deviation within ±5
Unstable hardness 10 8 Stable hardness
Clamp Screws Uneven hardness distribution of 6 4 2 0 Upper Limit Ensure the hardness
products in the same batch
(standard A90 as an example) -2 -4 stability through strict
process management
P.760 -6 -8 Lower Limit
A80 A85 -10 Economy Economy Economy Economy Economy * The above values are reference
values and are not guaranteed values.
Urethane Pushers QExample of Use
series
series
series
series
series
product 1 product 2 product 3 product 4 product 5
P.763 Threaded Stud / Tapped Type Threaded Stud Type With Hex Nut
Micrometer Heads
P.767
Anti-collision, impact resistant
Simple buffering, noise reduction and limiting
Motorized Positioning Stages high frequency and other occasions with high load requirements low frequency and other occasions requiring certain limit action
Suitable for large impact force,
Suitable for small impact force,
P.769

763