Page 414 - MISUMI SINGAPORE Economy Series

Economy Series Product Overview Product Overview Economy Series
Oil Free Bushings Oil Free Bushings

vs Standard Type QComplete specifications, stock item will be shipped in 1 day at the earliest. Unit: mm
Economy series Saving Straight type Shouldered Type Thrust Type
up to
Type
2 Oil Free Bushings 66 % Straight Type* 5~100 Length 2
I.D.
Linear Guides / Linear Bushings / Ball Splines / Oil Free Bushings Use for medium and low Standard Flanged Type Center Flanged Type Pilot Flanged Type Standard Flanged Type 5~100 10~100 Ball Splines / Oil Free Bushings Linear Guides / Linear Bushings /
6~100
Shouldered Type*
8~100
10~60
6~50
Thrust Type
speed linear motion
6~50
8~40
I.D. tolerance precision class 7 Center Flanged Type 10~40 20~80
25~60
Pilot Flanged Type
Miniature Linear Guides ensures more accurate locating QSpecification Comparison (Taking the straight type as an example) Linear Guides Miniature
*Including standard and thin wall types
Smooth surface makes
P.309 linear motion smoother · The tolerance class of I.D. and O.D. is the same as that of MISUMI standard products, and the quality P.309
is guaranteed by factory inspection.
Linear Guides for Medium and Heavy Load QI.D. tolerance precision class 7 ensures more accurate locating. · R chamfer, which facilitates installation Medium and Heavy Load Linear Guides for
· The standard load and operating speed of the catalog are ensured, so it can be used with reliance.

P.321 · Even for MISUMI Economy series, the inspection standard is the same as that of MISUMI standard products, Tolerance class of Tolerance class of Chamfer shape Maximum Allowable Maximum Allowable Velocity P.321
and factory inspection is carried out to provide users with products that meet the catalog specifications.
Cross Roller Guides I.D. Dimension Check O.D. Dimension Check Overall length dimension check Appearance inspection I.D. O.D. Regular lubrication Unlubricated Guides Cross Roller
Surface Pressure
MISUMI
P.337 standard product R angle 29N/mm 2 1m/s 0.5m/s P.337
Linear Guide Shafts MISUMI Class 7 Class 6 20.3N/mm 2 0.7m/s 0.35m/s Shafts Linear Guide

P.341 Economy series Easy to install P.341
C angle
Linear Bushings Generic Products Rough - Bushings Linear
on the Market*

P.349 QSmooth surface makes linear motion smoother * Generic Products on the Market are similar products randomly purchased by our company from online or offline markets P.349
* The test data are obtained through testing by our company, which are for reference only
· Slow feed cutting is adopted for MISUMI Economy series, resulting in smooth surface, reducing
Ball Spline friction in linear motion, and enhancing life-time. MISUMI Economy series QCategories of use Ball Spline
Cases of poor quality of Generic Products on the Market
P.386 Rough surface, large friction and short life-time Smooth surface, smoother when used with linear shaft MISUMI standard product MISUMI Economy series P.386
Easily applicable in mechanisms of linear or rotary motion Displays excellent performance in mechanisms of linear motion
Oil Free Bushings standard product Economy series Bushings Oil Free
MISUMI
MISUMI
P.409 P.409
Shaft Supports Shaft Collars Shaft Collars Shaft Supports

P.430 P.430

409