Page 710 - MISUMI SINGAPORE Economy Series

Economy series Product Overview Product Overview Economy series
Flat Belt Flat Belt

QSave time by providing the technical parameters needed to design a conveyor line
vs Standard Type
Economy Series Saving · The technical parameters required in the design of the conveyor line are the actual measured values of MISUMI.
up to
8 Flat Belts 76 % Application Surface Material Number of Layers Minimum Pulley Allowable (Reference value for ground steel)
Friction Coefficient
Flat Belts / Rollers / Cam Followers 4 most common types for For General Use Polyvinyl Chloride 1 2 1 2 φmm N/mm Surface Rear
Tension
Diameter
0.4
Urethane
0.1
4
10
Urethane
0.1
0.4
30
6
conveyor lines are available.
0.2
4
0.5
10
0.2
Polyvinyl Chloride
30
0.5
6
Urethane
For Electronic Parts
Urethane
0.4
0.1
30
8
6
Flat Belt Pulleys For General Use For Electronic Parts *Surface Resistance Value: 10 ~10 Ω Urethane Impregnated 1 2 1 15 4 6 4 0.4 0.1
For Sliding
10
0.2
0.1
For Sliding
For Transferring For Transferring Bulk Materials Urethane Impregnated 2 1 20 6 4 0.2 0.1
Urethane
20
0.4
0.2
P.699 Bulk Materials
EFor relevant technical parameters of flat belts, please refer to MISUMI official website.
* The surface resistance value is the value measured only with the belt under the following test conditions.It changes due to the influence of the environment and
Flat Belt QUsage difference between MISUMI Economy series and MISUMI standard product Test Conditions: Temperature 23±2°C, Humidity 50±5%.
peripheral devices. This is a reference value, not guaranteed value.
P.705 · The difference between MISUMI Economy series and MISUMI standard product is noise performance. QPrevents "work displacement" that is common when transporting lightweight workpieces
· MISUMI Economy series flat belt uses a durable fabric on the back side to effectively prevent warping on
both sides of the belt and prevent displacement during transportation of lightweight workpieces
Urethane Molded Rollers · The noise performance is affected by the ambient sound of the surrounding equipment, and the impact is small in actual use. Generic products on the market * MISUMI Economy series
MISUMI Economy series
MISUMI standard product
P.711
Ball Rollers Example of Use
P.717 High-speed transfer General purpose
transfer
where noise control is required
Cam Followers Noise performance* Excellent (56dB) Normal (61dB)
installation test of MISUMI conveyor, for reference only.
P.725 * The difference in fricative noise of the iron plate that supports the conveyor belt etc. is about 5 dB. The reference value of friction noise is the result of the actual
QExample of Customer Use * Generic products on the market are similar products randomly purchased by our company from online or offline markets
Roller Followers QCustomer Voice QQuality Assurance of Joint for Smooth Transfer
· The joint seam of MISUMI Economy series flat belt is flat, which can avoid the transfer failure caused by belt runout and uneven joint seam.
P.735 Electronic parts pallet conveyor line Generally speaking, 10 to 10 Ω Generic products on the market * MISUMI Economy series
8
6
can meet the transmission
Silicon Bearings Threaded Bearings MISUMI Economy series Flat Belts requirements of common Body Thickness : 1.0mm Body Thickness Flat joint seam : 0.90mm
Uneven joint seam
For Electronic Parts
electronic parts. It would be better
design could be provided at an
Segment Difference at Joint Seam : 0.03mm
Segment Difference at Joint Seam : 0.5mm
P.737 MISUMI Economy series if the parameters required for the Joint Thickness : 1.5mm Joint Thickness : 0.93mm
Flat Belt Pulleys affordable price.
Electronic Parts Shanghai XXX
Technology
Co., Ltd.
Mr. Hao
Customer
* Generic products on the market are similar products randomly purchased by our company from online or offline markets
* The above values are obtained through random sampling by our company for reference only.
705