Page 705 - MISUMI SINGAPORE Economy Series

Economy series Product Overview Product Overview Economy series
Flat Belt Pulleys / Idlers Flat Belt Pulleys / Idlers

QEconomy series flat belt pulleys have knurled surfaces, increasing anti-slip
vs Standard Type capacity by 4.7 times
Economy Series Saving MISUMI standard product MISUMI Economy series 8
up to
Flat Belt Pulleys / Idlers 71 % Flat Belt Pulley Static Friction Force (N) Non Knurled Surface Knurled Surface

MISUMI
Economy series 21
Knurling is added to acquire Knurled Type Cam Followers Flat Belts / Rollers /
non-slip performance.
MISUMI Anti-slip capacity increased by 4.7 times
standard product 4.5
Less belt vibration Non Knurled Type

0 5 10 15 20 25 Pulleys Flat Belt
Higher tightening torque
Test: static friction force test for belts and pulleys
Method: fix the flat belt pulley and use the electronic force
gauge to measure the static friction force of the * Under normal use, there is no obvious difference in belt wear P.699
belt under the same load compared with non-knurled pulleys
Equipment: electronic force gauge Flat Belt
QSpecification
QGuaranteed coaxiality of no more than 0.05, effectively reducing the belt P.705
MISUMI Economy series Flat Belt Pulleys MISUMI Economy series Flat Belt Idlers vibration when running.
Flanged Type Crown Type Flanged Type Straight Type Crown Type
Non Knurled Flat Belt Pulleys Flat Belt Idlers Molded Rollers Urethane
Pφ0.05 Pφ0.05 P.711

Knurled Ball Rollers

P.717

QExample of Use Followers Cam

Example Name Double row pallet transfer example Single row workpiece transfer example P.725
MISUMI Economy series QTightening torque is increased by 11.8%, with set screw holes changed to
MISUMI Economy series Flat Belt Idlers
Flat Belt Idlers (Medium Length) 120°.
(Short Length) Followers Roller
MISUMI standard product MISUMI Economy series
MISUMI Economy
series Flat Belts Set Screw Holes (90°) Set Screw Holes (120°) P.735
Tightening Torque (N·m)
MISUMI Economy d Shaft Bore Specs d Shaft Bore Specs
Design Illustration series Flat Belts
Locking Round Hole + Tapped Round Hole + Tapped Threaded Bearings Silicon Bearings
Threaded P P
Hole 6.6 90°
(120°) 120° P.737
MISUMI Economy series MISUMI Economy series Locking
Flat Belt Pulleys (Short Length) Flat Belt Pulleys Threaded 11.8% increase in tightening torque
(Medium Length) Hole 5.9
· The Double Row Conveyor is a pallet transfer · The work piece can be transported directly by using (90°) New JIS Keyway + Tapped New JIS Keyway + Tapped
mechanism that combines a short length flat belt the flat belt pulley idler and flat belt. N·NK N
pulley, idlers and flat belts. · Single Row Conveyor 5.4 5.8 6.2 6.6 90°
Introduction · For long-distance transportation Depending on the width of the workpiece, a medium Test: sliding torque test 120°
to Use It is recommended to choose short length crown flat belt pulleys / idlers and flat belts of appropriate Method: fix the pulley, rotate the central shaft, and test the
width needs to be selected.
type pulleys, idlers to prevent meandering.
· When selecting flange type pulleys / idlers · For long-distance transportation rotational torque at the moment of sliding
Attention to be paid not to interfere with the height of Medium length crowned pulleys / idlers with high Equipment: torque tester
the flange and the pallet being transported. meandering prevention is recommend.
700