Page 704 - MISUMI SINGAPORE Economy Series

Economy series Product Overview Product Overview Economy series
Flat Belt Pulleys / Idlers Flat Belt Pulleys / Idlers

QEconomy series flat belt pulleys have knurled surfaces, increasing anti-slip
vs Standard Type capacity by 4.7 times
Economy Series Saving
up to
8 Flat Belt Pulleys / Idlers 71 % Flat Belt Pulley Static Friction Force (N) MISUMI standard product MISUMI Economy series
Flat Belts / Rollers / Cam Followers Knurling is added to acquire MISUMI 21
Non Knurled Surface
Knurled Surface
Economy series
Knurled Type
non-slip performance.
standard product
Non Knurled Type
Less belt vibration MISUMI 4.5 Anti-slip capacity increased by 4.7 times
Flat Belt Pulleys Higher tightening torque 0 5 10 15 20 25
Test: static friction force test for belts and pulleys
Method: fix the flat belt pulley and use the electronic force
P.699
gauge to measure the static friction force of the * Under normal use, there is no obvious difference in belt wear
belt under the same load compared with non-knurled pulleys
Flat Belt QSpecification Equipment: electronic force gauge

P.705 MISUMI Economy series Flat Belt Pulleys MISUMI Economy series Flat Belt Idlers QGuaranteed coaxiality of no more than 0.05, effectively reducing the belt
vibration when running.
Urethane Molded Rollers Non Knurled Crown Type Flanged Type Straight Type Crown Type Flat Belt Pulleys Flat Belt Idlers
Flanged Type

P.711 Pφ0.05 Pφ0.05
Ball Rollers Knurled

P.717

Cam Followers QExample of Use

P.725 Example Name Double row pallet transfer example Single row workpiece transfer example QTightening torque is increased by 11.8%, with set screw holes changed to
MISUMI Economy series
Roller Followers MISUMI Economy series Flat Belt Idlers 120°.
Flat Belt Idlers
(Medium Length)
(Short Length)
MISUMI Economy MISUMI standard product MISUMI Economy series
P.735 series Flat Belts Tightening Torque (N·m) Set Screw Holes (90°) Set Screw Holes (120°)
Silicon Bearings Threaded Bearings Design Illustration MISUMI Economy Threaded d Shaft Bore Specs d Shaft Bore Specs
series Flat Belts
Locking
Round Hole + Tapped
Round Hole + Tapped
P
P
Hole
P.737 (120°) 6.6 90° 120°
MISUMI Economy series MISUMI Economy series Locking
Flat Belt Pulleys (Short Length) Flat Belt Pulleys Threaded 11.8% increase in tightening torque
(Medium Length) Hole 5.9
· The Double Row Conveyor is a pallet transfer · The work piece can be transported directly by using (90°) New JIS Keyway + Tapped New JIS Keyway + Tapped
mechanism that combines a short length flat belt the flat belt pulley idler and flat belt. N·NK N
pulley, idlers and flat belts. · Single Row Conveyor 5.4 5.8 6.2 6.6 90°
Introduction · For long-distance transportation Depending on the width of the workpiece, a medium Test: sliding torque test 120°
to Use It is recommended to choose short length crown flat belt pulleys / idlers and flat belts of appropriate Method: fix the pulley, rotate the central shaft, and test the
type pulleys, idlers to prevent meandering.
width needs to be selected.
· When selecting flange type pulleys / idlers · For long-distance transportation rotational torque at the moment of sliding
Attention to be paid not to interfere with the height of Medium length crowned pulleys / idlers with high Equipment: torque tester
the flange and the pallet being transported. meandering prevention is recommend.
699