Page 711 - MISUMI SINGAPORE Economy Series

Economy series Product Overview Product Overview Economy series
Flat Belt Flat Belt

QSave time by providing the technical parameters needed to design a conveyor line
vs Standard Type
Economy Series Saving · The technical parameters required in the design of the conveyor line are the actual measured values of MISUMI. 8
up to
Friction Coefficient
Flat Belts 76 % Application Surface Material Number of Layers Minimum Pulley Allowable (Reference value for ground steel)
Tension
Diameter
φmm
N/mm
Surface
Rear
4 most common types for Urethane 1 2 10 4 6 0.4 0.1 Cam Followers
Urethane
0.4
0.1
30
conveyor lines are available. For General Use Polyvinyl Chloride 1 10 4 0.5 0.2 Flat Belts / Rollers /
Polyvinyl Chloride 2 30 6 0.5 0.2
For General Use For Electronic Parts For Electronic Parts Urethane 1 15 4 0.4 0.1
*Surface Resistance Value: 10 ~10 Ω Urethane 2 30 6 0.4 0.1
6
8
For Sliding Urethane Impregnated 1 10 4 0.2 0.1
For Sliding Urethane Impregnated Pulleys Flat Belt
For Transferring For Transferring Bulk Materials Urethane 2 1 20 6 4 0.2 0.1
0.2
20
0.4
Bulk Materials P.699
EFor relevant technical parameters of flat belts, please refer to MISUMI official website.
* The surface resistance value is the value measured only with the belt under the following test conditions.It changes due to the influence of the environment and
peripheral devices. This is a reference value, not guaranteed value.
Test Conditions: Temperature 23±2°C, Humidity 50±5%. Flat Belt
QUsage difference between MISUMI Economy series and MISUMI standard product QPrevents "work displacement" that is common when transporting lightweight workpieces
· The difference between MISUMI Economy series and MISUMI standard product is noise performance. · MISUMI Economy series flat belt uses a durable fabric on the back side to effectively prevent warping on P.705
both sides of the belt and prevent displacement during transportation of lightweight workpieces
· The noise performance is affected by the ambient sound of the surrounding equipment, and the impact is small in actual use.
Generic products on the market * MISUMI Economy series Molded Rollers Urethane
MISUMI standard product MISUMI Economy series
P.711
Example of Use Ball Rollers
High-speed transfer General purpose P.717
where noise control is required transfer
Noise performance* Excellent (56dB) Normal (61dB) Followers Cam
* The difference in fricative noise of the iron plate that supports the conveyor belt etc. is about 5 dB. The reference value of friction noise is the result of the actual
installation test of MISUMI conveyor, for reference only.
P.725
QExample of Customer Use * Generic products on the market are similar products randomly purchased by our company from online or offline markets
QQuality Assurance of Joint for Smooth Transfer Followers Roller
Electronic parts pallet conveyor line QCustomer Voice · The joint seam of MISUMI Economy series flat belt is flat, which can avoid the transfer failure caused by belt runout and uneven joint seam.

Generally speaking, 10 to 10 Ω Generic products on the market * MISUMI Economy series P.735
8
6
can meet the transmission
MISUMI Economy series Flat Belts requirements of common
Uneven joint seam
For Electronic Parts electronic parts. It would be better Body Thickness : 1.0mm Body Thickness Flat joint seam : 0.90mm Threaded Bearings Silicon Bearings
if the parameters required for the Joint Thickness : 1.5mm Joint Thickness : 0.93mm
MISUMI Economy series design could be provided at an Segment Difference at Joint Seam : 0.5mm Segment Difference at Joint Seam : 0.03mm P.737
Flat Belt Pulleys affordable price.

Electronic Parts Shanghai XXX
Technology
Co., Ltd.
Mr. Hao

Customer
* Generic products on the market are similar products randomly purchased by our company from online or offline markets
* The above values are obtained through random sampling by our company for reference only.
706