Page 1282 - MISUMI SINGAPORE Economy Series

Economy series Alteration Code Table Alteration Code Table Economy series
Aluminum Frames Aluminum Frames

EAbout each frame's suitability for alterations, please refer to D P.1279 · 1280. Frame Cutting
Aluminum Frames Alterations Left Tapped Holes on End Faces Left Angle Cutting Right Frames Aluminum
Tapped hole machining
Right
Left and Right
Code
P.1183 4-Side Slots LTP RTP TPW LCT (LAT,LBT,LDT) RCT (RAT,RBT,RDT) P.1183
Brackets / Corners / Sheet Metals / Connectors Sheet Metals / Connectors Brackets / Corners /

P.1215 Square P.1215
Nuts / Bolts Shape Nuts / Bolts

P.1243 2-Side Slots 2-Side P.1243
Planes
Decorative Accessories 4-Side Slots Accessories Decorative

P.1258 P.1258
Panel Fasteners / Panels / Door Sliding Slot Accessories Rectangular 2-Side Slots 2-Side Door Sliding Slot Accessories Panel Fasteners / Panels /
Shape

P.1262 Planes P.1262
17 17
Aluminum Frames / Related Accessories L Shape - - Related Accessories Aluminum Frames /

Q Benchmark for Frame Placement
The frame placement method is the benchmark for determining the left and Q Multiple Alterations
If you specify more than one alteration at a time, please indicate the
right of a frame, and the placement method is shown in the figure below. alteration codes sequentially.
EFor the hole opening direction, please refer to D P.1275 ~ 1278. Ordering Example
1Longitudinal placement LCF8-4040-200-LTP-RDH LCFT8-4040-200-LWH-RWV
2Placement with plane on the bottom
3Placement with planes on the bottom and right side
1Placement 2Placement 3Placement L-Shaped
Example Example Example Placement Example

1277